Overview
New Servo Driven Dust Cover Control
This solution is coming soon!
![](https://rapidchangeatc.com/wp-content/uploads/2024/06/Masso-Plug-and-play-1.png)
All the wiring diagrams below are for the current stepper motor driven dust cover
Tool Recognition Sensor wiring diagram
This diagram matches the black, red and green wires from the supplied cable.
![](https://rapidchangeatc.com/wp-content/uploads/2024/05/image-4.png)
5v Relay wiring diagram
![](https://rapidchangeatc.com/wp-content/uploads/2024/05/image-6.png)
General wiring diagram
There must be a common Gnd from the 5v power supply but only one is needed.
![](https://rapidchangeatc.com/wp-content/uploads/2024/05/image-7-1024x782.png)
VFD Setup
Here is a wiring diagram for wiring the VFD to run in reverse.
![](https://rapidchangeatc.com/wp-content/uploads/2024/05/image-2.png)
Masso also has a video on the subject that you can find here.
Subroutine Generation
We have developed a desktop app that will generate all the subroutine files and is similar to our other configuration UIs. This is an Alpha version, it will generate the needed subroutines but is unfinished as far as other functionality goes. The app allows you to fill in all the variables for your magazine settings, then generates the files in a folder of your choosing. The files must be present in the same folder that the g code file is to be run from.
Configuration Video
Updates
If you would like to be notified by email when new updates are available please fill out this form.