Description

ER11 6 Pocket Basic

Patent Pending RapidChange ATC Magazines allow for the use of cutting tools with a maximum diameter of 15mm for ER11 collets and is designed for A Type clamping nuts.

The RapidChange ATC Magazine is machined from tough HDPE employing our unique patent pending spring loaded socket design. It works with your CNC and common spindle to allow smooth and reliable tool changes out of the box. Aside from a tool setter and the ability to run your spindle in reverse for unloading tools.

Macros for integrated motion control platforms as well as g code templates for writing your own macros can be downloaded from the website after purchase.

Dimensions for all magazine variations can be found HERE.
If you would like to check the fit on your machine we have mock up 3D models in .STEP format on our Discord Server for download.

Comprehensive installation Instructions to get you up and running quickly.

The Basic Magazine Now comes with IR Tool Detection. It also uses the Same PCB control board minus the ATTiny85 Microcontroller for those who wish to employ their own method of dust control. The housings are the same as the Premium model therefore you can add your own servos and dust cover.

Tool Setter Sold separately. Any external tool setter may be used in the tool change procedure. We are no longer incorporating the adapter for the 3D Probe due to the new low profile cover.

We have developed a tool setter which is optically triggered and very reliable. It actually tested out slightly better than the 3D Probe we had been recommending.
It also is modular so it can be easily added to our current design. Our optical tool setter will be available in our store soon. For the moment if you are interested in this add on option please contact us at info@rapidchangeatc.com

Electronics are tucked nicely into the right end housing on the magazine.
12-30v is required and can be wired to the motion control board main power or a continuous aux power supply.

Red Power 12-30v input

Black Gnd. (If using a separate power supply that of the motion controller the they must share a common ground).

Yellow IR signal wire is connected to an input on the motion controller active High.